Showing posts with label Veil. Show all posts
Showing posts with label Veil. Show all posts

Wednesday, 11 January 2012

DIY: Basic Wedding Veil - Under $10

I recently posted about how to DIY a Birdcage Wedding Veil since my bridesmaid duties recently put my crafting skills into work.  I had no idea that wedding veils were so expensive and we ended up making one for under $10 - the tulle was about $7 on sale and the comb was about $1.50. It was fairly easy and much faster than I  anticipated so it’s perfect for those Brides-to-be’s on a budget!  Since my friend the bride-to-be wanted a classic wedding veil for the ceremony and a birdcage veil for the reception we experimented with tulle until we got exactly the right proportions she was looking for.  Please note that this veil was not made to cover the face.


Materials:
2 yards soft tulle (I used 96” wide tulle so I would have a lot to play with but we trimmed it down a lot)
Sharp scissors or a rotary cutter and board
Ruler
1 Comb
Needle and Thread
Decorative Touches (Flower/Ribbon)


Compared to the Birdcage Veil DIY, the classic veil is a lot simpler in terms of construction although you could make it as fancy as you want by hemming the edges, adding trim lace or using craft glue to apply rhinestones or flat back pearls.  Since my friend wanted a really simple look we left the edge raw.  This means that you must cut really cleanly with very sharp scissors and a steady hand.
If you are able to gently steam out the fabric before you begin it will make it easier to control and accurately cut the fabric (since tulle may melt, I did not apply the iron directly on the fabric just held it gently over as I hit the steam button).
Fold the tulle into quarters.  Cut out a soft oval shape.  My oval was about 59”x54” to create a double layered veil that comes to waist level.
Unfold the oval and trim away any jagged edges and soften out the shape.
Fold the oval leaving desired space between the two layers.  The difference between the 2 edges was about 7” on the veil I created.
Using a needle and thread make a loose, even running stitch through the entire side of the folded edge of the oval.
Softly gather up the tulle until it is about the width of the comb. Evenly distribute the tulle along the edge of the tulle before securing.

If you like you can cover the comb in advance with ribbon by wrapping it around the metal.  For our purposes I just secured the tulle to the comb using needle and thread.
At this point you can add whatever fabric flowers or decorative touches onto the comb as desired.  Since my friend’s wedding decorations are not yet finalized we left off the decorations and kept things simple.

Ta Da!  A very simple classic wedding veil that cost under $10 to make.

Thursday, 29 December 2011

DIY Birdcage Wedding Veil

IMAG4050

So one of my closest friends is getting married next year and since I am probably the most craft-y person in her bridal party I volunteered my services to help her make 2 DIY projects – 1st the Birdcage Veil, 2nd a more traditional tulle veil.  Since I’ve never made any veil before I looked at OnceWed.com for basic directions and made a couple of modifications as I went.

Materials:

1/2 yard of 9” wide Russian Veiling – You can buy this on Etsy or at specialty fabric stores like Mood

1 sheet of felt (cut into 2 4”x4” squares) – we used a navy blue to be her “something blue”

Needle & Thread

2 Small Hat Combs – Purchased from Etsy

Scissors

Fabric Glue

Measuring Tape

Silk Flowers and anything else you might want to add

IMAG4052IMAG4054

The first thing I did was cut 2 hearts out of the 4”x4” squares of felt that are the same shape. 1 will serve as extra stability and to cover up any unattractive stitches later on.

Cut a 14” piece of the veil (you can add an inch or 2 for fullness).  Cut the veiling right above the little knots where the “X” of the veiling comes together.

With a needle make a running stitch through one of the cut ends of the veiling and secure to the felt.

IMAG4055IMAG4056

Repeat on the other side.

IMAG4057IMAG4058IMAG4059

You can make a running stitch through the finished upper edge of the veil to gather in the fabric and tack the edge to the felt heart.  Place the heart on your head in the mirror to determine if you like the positioning of the veiling and re-distribute and add more tacks as necessary.

IMAG4061IMAG4062

On the other felt heart secure the hat combs with needle and thread.  I angled them to help ensure they will stay in place on the big day.  Put this aside for the time being.

We found our flowers at Walmart and they were slightly too big so we removed some of the petals to make them the desired size.

IMAG4063IMAG4065IMAG4066

Arrange the flowers on the veil and pin them in place.  Make sure you try it on to make sure they are in the ideal location.  Using needle and thread or fabric glue you can secure the flowers into place.  I personally felt safer using needle and thread to make sure it wouldn’t easily come apart. Using fabric glue or needle and thread attach the other heart that has the combs attached into place.

IMAG4067IMAG4069

Voila! Check out the finished product.  We may add some additional accent flowers as the big day approaches and the wedding décor has been nailed down but for now we kept it simple.